gap_map.cpp

Go to the documentation of this file.

// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
 
#include "statistc.h"
#include "gap_map.h"
 
BOOL_VAR(gapmap_debug, false, "Say which blocks have tables");
BOOL_VAR(gapmap_use_ends, false, "Use large space at start and end of rows");
BOOL_VAR(gapmap_no_isolated_quanta, false,
"Ensure gaps not less than 2quanta wide");
double_VAR(gapmap_big_gaps, 1.75, "xht multiplier");
 
/*************************************************************************
 * A block gap map is a quantised histogram of whitespace regions in the
 * block. It is a vertical projection of wide gaps WITHIN lines
 *
 * The map is held as an array of counts of rows which have a wide gap
 * covering that region of the row. Each bucket in the map represents a width
 * of about half an xheight - (The median of the xhts in the rows is used.)
 *
 * The block is considered RECTANGULAR - delimited by the left and right
 * extremes of the rows in the block. However, ONLY wide gaps WITHIN a row are
 * counted.
 *
 *************************************************************************/
 
GAPMAP::GAPMAP(                 //Constructor
               TO_BLOCK *block  //block
              ) {
  TO_ROW *row;                   //current row
  BLOBNBOX_IT blob_it;           //iterator
  TBOX blob_box;
  TBOX prev_blob_box;
  int16_t gap_width;
  int16_t start_of_row;
  int16_t end_of_row;
  STATS xht_stats (0, 128);
  int16_t min_quantum;
  int16_t max_quantum;
  int16_t i;
 
  /*
    Find left and right extremes and bucket size
  */
  map = nullptr;
  min_left = INT16_MAX;
  max_right = -INT16_MAX;
  total_rows = 0;
  any_tabs = false;
 
  // row iterator
  TO_ROW_IT row_it(block->get_rows());
  for (row_it.mark_cycle_pt (); !row_it.cycled_list (); row_it.forward ()) {
    row = row_it.data ();
    if (!row->blob_list ()->empty ()) {
      total_rows++;
      xht_stats.add (static_cast<int16_t>(floor (row->xheight + 0.5)), 1);
      blob_it.set_to_list (row->blob_list ());
      start_of_row = blob_it.data ()->bounding_box ().left ();
      end_of_row = blob_it.data_relative (-1)->bounding_box ().right ();
      if (min_left > start_of_row)
        min_left = start_of_row;
      if (max_right < end_of_row)
        max_right = end_of_row;
    }
  }
  if ((total_rows < 3) || (min_left >= max_right)) {
    bucket_size = 0;
    map_max = 0;
    total_rows = 0;
    min_left = max_right = 0;
    return;
  }
  bucket_size = static_cast<int16_t>(floor (xht_stats.median () + 0.5)) / 2;
  map_max = (max_right - min_left) / bucket_size;
  map = new int16_t[map_max + 1];
  for (i = 0; i <= map_max; i++)
    map[i] = 0;
 
  for (row_it.mark_cycle_pt (); !row_it.cycled_list (); row_it.forward ()) {
    row = row_it.data ();
    if (!row->blob_list ()->empty ()) {
      blob_it.set_to_list (row->blob_list ());
      blob_it.mark_cycle_pt ();
      blob_box = box_next (&blob_it);
      prev_blob_box = blob_box;
      if (gapmap_use_ends) {
        /* Leading space */
        gap_width = blob_box.left () - min_left;
        if ((gap_width > gapmap_big_gaps * row->xheight)
        && gap_width > 2) {
          max_quantum = (blob_box.left () - min_left) / bucket_size;
          if (max_quantum > map_max) max_quantum = map_max;
            for (i = 0; i <= max_quantum; i++)
            map[i]++;
        }
      }
      while (!blob_it.cycled_list ()) {
        blob_box = box_next (&blob_it);
        gap_width = blob_box.left () - prev_blob_box.right ();
        if ((gap_width > gapmap_big_gaps * row->xheight)
        && gap_width > 2) {
          min_quantum =
            (prev_blob_box.right () - min_left) / bucket_size;
          max_quantum = (blob_box.left () - min_left) / bucket_size;
          if (max_quantum > map_max) max_quantum = map_max;
          for (i = min_quantum; i <= max_quantum; i++)
            map[i]++;
        }
        prev_blob_box = blob_box;
      }
      if (gapmap_use_ends) {
        /* Trailing space */
        gap_width = max_right - prev_blob_box.right ();
        if ((gap_width > gapmap_big_gaps * row->xheight)
        && gap_width > 2) {
          min_quantum =
            (prev_blob_box.right () - min_left) / bucket_size;
          if (min_quantum < 0) min_quantum = 0;
          for (i = min_quantum; i <= map_max; i++)
            map[i]++;
        }
      }
    }
  }
  for (i = 0; i <= map_max; i++) {
    if (map[i] > total_rows / 2) {
      if (gapmap_no_isolated_quanta &&
        (((i == 0) &&
        (map[i + 1] <= total_rows / 2)) ||
        ((i == map_max) &&
        (map[i - 1] <= total_rows / 2)) ||
        ((i > 0) &&
        (i < map_max) &&
        (map[i - 1] <= total_rows / 2) &&
      (map[i + 1] <= total_rows / 2)))) {
        map[i] = 0;              //prevent isolated quantum
      }
      else
        any_tabs = true;
    }
  }
  if (gapmap_debug && any_tabs)
    tprintf ("Table found\n");
}
 
 
/*************************************************************************
 * GAPMAP::table_gap()
 * Is there a bucket in the specified range where more than half the rows in the
 * block have a wide gap?
 *************************************************************************/
 
bool GAPMAP::table_gap(             //Is gap a table?
        int16_t left,  //From here
        int16_t right  //To here
) {
  int16_t min_quantum;
  int16_t max_quantum;
  int16_t i;
  bool tab_found = false;
 
  if (!any_tabs)
    return false;
 
  min_quantum = (left - min_left) / bucket_size;
  max_quantum = (right - min_left) / bucket_size;
  // Clip to the bounds of the array. In some circumstances (big blob followed
  // by small blob) max_quantum can exceed the map_max bounds, but we clip
  // here instead, as it provides better long-term safety.
  if (min_quantum < 0) min_quantum = 0;
  if (max_quantum > map_max) max_quantum = map_max;
  for (i = min_quantum; (!tab_found && (i <= max_quantum)); i++)
    if (map[i] > total_rows / 2)
      tab_found = true;
  return tab_found;
}